Difference between revisions of "2047 Warwickshire"

From SVR Wiki
Jump to: navigation, search
(Add note on mileage before 1971)
m
(25 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[File:MW2047_20091031.jpg |thumb|300px|right| 2047 ‘Warwickshire’ in 2009]]
+
{{Infobox steam loco
Manning Wardle [[Whyte notation | 0-6-0ST]] Works No 2047, built in 1926, was the last locomotive to be built by Manning Wardle before the Company closed due to the post World War One recession. It was assembled using standard parts from various other classes, but is visually similar to the standard Manning Wardle "Q" class. The boiler was constructed using an antiquated lap joint design rather than butt joints which had become the norm for railway locomotive boilers by that time.<ref>[[Bibliography#Books | Shaw (1998)]] p. 45.</ref>
+
|image      = MW2047_20091031.jpg
 +
|caption    = 2047 Warwickshire
 +
|construc  = Manning, Wardle & Co
 +
|wheels    = 0-6-0
 +
|status    = Out of service
 +
|locono    = Works No 2047
 +
|othernos  =
 +
|designed  = Manning, Wardle & Co
 +
|locotype  =
 +
|built      = 1926
 +
|years1    = 1967
 +
|events1    = Arrived on SVR
 +
|years2    = 1968
 +
|events2    = First steamed
 +
|years3    = 1979
 +
|events3    = Last steamed
 +
|length    = 25ft 0"
 +
|weight    = 25t
 +
|power      = 12,695 lb
 +
|pressure  = 160 lb/sq in
 +
}}Manning Wardle [[Whyte notation | 0-6-0ST]] Works No 2047, built in 1926, was the last locomotive to be built by Manning Wardle before the Company closed due to the post World War One recession. It was assembled using standard parts from various other classes, but is visually similar to the standard Manning Wardle "Q" class.<ref>Heritage Railway Magazine 17 September 2017 describes it as an N Class.</ref> The boiler was constructed using an antiquated lap joint design rather than butt joints which had become the norm for railway locomotive boilers by that time.<ref>[[Bibliography#Books | Shaw (1998)]] p. 45.</ref>
  
 
==2047 in service==
 
==2047 in service==
Line 13: Line 33:
 
==2047 in preservation==
 
==2047 in preservation==
 
Following withdrawal, RPC offered the locomotive to the Warwickshire Railway Society.  A separate group, the [[Warwickshire Industrial Loco Preservation Group | Warwickshire Industrial Loco Preservation Group]] was formed and the necessary funds raised by a share issue (£150 for the locomotive and £150 for transport and spares).  After an inspection was carried out in July 1967, 2047 was purchased and arrived on the Severn Valley Railway on [[Severn Valley Railway Timeline 1965-1969#1967 |22 October 1967]].<ref>[[Bibliography#Books | Shaw (1998)]] p. 51.</ref>   
 
Following withdrawal, RPC offered the locomotive to the Warwickshire Railway Society.  A separate group, the [[Warwickshire Industrial Loco Preservation Group | Warwickshire Industrial Loco Preservation Group]] was formed and the necessary funds raised by a share issue (£150 for the locomotive and £150 for transport and spares).  After an inspection was carried out in July 1967, 2047 was purchased and arrived on the Severn Valley Railway on [[Severn Valley Railway Timeline 1965-1969#1967 |22 October 1967]].<ref>[[Bibliography#Books | Shaw (1998)]] p. 51.</ref>   
 +
 +
<gallery>
 +
File:Warwickshire move 1.jpg|2047 being loaded at Rugby
 +
File:Warwickshire move 2.jpg|2047 on the trailer
 +
File:Warwickshire move 3.jpg|2047 en route
 +
File:Warwickshire move 4.jpg|2047 on the trailer
 +
File:Warwickshire move 5.jpg|2047 en route
 +
File:Warwickshire move 6.jpg|2047 being unloaded at Bridgnorth
 +
</gallery>
  
 
===First boiler ticket===
 
===First boiler ticket===
The locomotive was first steamed in December 1968 and initially finished in an unlined pale blue livery.  Black and white lining and "Warwickshire" name plates were later applied in time for a planned naming ceremony in 1970, although this had to be re-arranged and was eventually carried out on 3 April 1971 by Mr H A Vigar, the former manager of RPC’s New Bilton Works.<ref>[[Bibliography#Books | Shaw (1998)]] p. 52-53.</ref>   
+
The locomotive was first steamed on 21 December 1968<ref>[[Bibliography#Books|Williams (1974)]] p. 6.</ref>  and initially finished in an unlined pale blue livery.  Black and white lining and "Warwickshire" name plates were later applied in time for a planned naming ceremony in 1970, although this had to be re-arranged and was eventually carried out on 3 April 1971 by Mr H A Vigar, the former manager of RPC’s New Bilton Works.<ref>[[Bibliography#Books | Shaw (1998)]] p. 52-53.</ref>   
  
 
<gallery>
 
<gallery>
Line 55: Line 84:
  
 
===Current status===
 
===Current status===
The long awaited overhaul of 2047 began in with a move to Bridgnorth in November 2010. {{As of|2016|07}} the overhaul is in progress at the [[Bridgnorth Loco Works]], although a number of components have been moved to [[Bewdley]] for work to be done there. Pictures of progress at both locations can be seen on the [http://wilt.jimdo.com/7d-mw2047-restoration-progress/ Warwickshire Industrial Locomotive Preservation Trust web site 2047 restoration page].  
+
The long awaited overhaul of 2047 began in with a move to Bridgnorth in November 2010. In 2013 quotations between £61,390 and £101,433 were obtained for the new boiler with an estimate of overhaul cost from the SVR of £184,306.<ref>[https://davidncooke686.jimdo.com/7-wilt-registered-charity-no-1041723/ 'WILT' page, David Cooke's website] (retrieved 17 February 2018)</ref> The overhaul progressed at [[Bridgnorth Loco Works]], with re-wheeling taking place in December 2018. A number of smaller components were moved to [[Bewdley]] and on 25 November 2018 the original boiler, smokebox and saddle tank were moved there on [[GWR 42343 Machinery Flat|Loriot N 42343]]. On 28 March 2019 the locomotive chassis was moved by [[BR Class 33 33108]] from Bridgnorth to [[Bewdley Down Yard]] for restoration to continue.
 +
 
 +
After arrival at Bewdley, the cab roof and sides were removed in October 2019 and brake gear was re-fitted to frames in November 2019. New bufferbeam profiles were delivered in early 2020. {{As of|2021|03}} an order for the new boiler is anticipated to be placed in mid-2021 with delivery due in 2023/24. 2047 was shunted under cover on 30 March 2021, talking the place formerly occupied by [[4150|GWR Large Prairie 4150]].<ref>[http://wilt.jimdo.com/7d-mw2047-restoration-progress/ WILT Restoration page]</ref> Pictures of progress can be seen on the [http://wilt.jimdo.com/7d-mw2047-restoration-progress/ Warwickshire Industrial Locomotive Preservation Trust web site 2047 restoration page].  
 +
 
 +
<gallery>
 +
GWR 43243 2047 20180714.jpg|Saddle tank, smokebox and boiler
 +
</gallery>
  
 
==Boiler lap joints==
 
==Boiler lap joints==
Line 70: Line 105:
 
==See also==
 
==See also==
 
[[Steam Locomotives]]<br>
 
[[Steam Locomotives]]<br>
[[Warwickshire Industrial Loco Preservation Group | Warwickshire Industrial Loco Preservation Group]]
+
[[Warwickshire Industrial Loco Preservation Group | Warwickshire Industrial Loco Preservation Group]]<br>
 +
[[SVR-based locomotives visiting other events]]<br>
 +
[[Rolling stock currently under restoration]]
  
 
==References==
 
==References==
 
<references/>
 
<references/>
 +
 +
{{SteamNavbox}}
 +
 +
[[Category:Rolling stock in Bewdley Down Yard]]

Revision as of 11:00, 6 April 2021

2047 Warwickshire
MW2047 20091031.jpg
2047 Warwickshire
Built By Manning, Wardle & Co
Configuration 0-6-0
Status Out of service
Loco Number Works No 2047
History
Built 1926
Designed By Manning, Wardle & Co
1967 Arrived on SVRSevern Valley Railway
1968 First steamed
1979 Last steamed
Technical
Length 25ft 0"
Weight 25t
Tractive effort 12,695 lb
Pressure 160 lb/sq in

Steam Locomotives

Manning Wardle 0-6-0ST Works No 2047, built in 1926, was the last locomotive to be built by Manning Wardle before the Company closed due to the post World War One recession. It was assembled using standard parts from various other classes, but is visually similar to the standard Manning Wardle "Q" class.[1] The boiler was constructed using an antiquated lap joint design rather than butt joints which had become the norm for railway locomotive boilers by that time.[2]

2047 in service

2047 was delivered to Rugby Portland Cement Co Ltd (RPC) at their New Bilton Works near Rugby on 9 August 1926. It remained there throughout its working life apart from a brief move to RPC’s nearby Southam Cement Works during 1943.

In 1954 2047 received a new inner firebox and other major firebox repairs. The locomotive was finally withdrawn from use in December 1966.[3]

2047 in preservation

Following withdrawal, RPC offered the locomotive to the Warwickshire Railway Society. A separate group, the Warwickshire Industrial Loco Preservation Group was formed and the necessary funds raised by a share issue (£150 for the locomotive and £150 for transport and spares). After an inspection was carried out in July 1967, 2047 was purchased and arrived on the Severn Valley Railway on 22 October 1967.[4]

First boiler ticket

The locomotive was first steamed on 21 December 1968[5] and initially finished in an unlined pale blue livery. Black and white lining and "Warwickshire" name plates were later applied in time for a planned naming ceremony in 1970, although this had to be re-arranged and was eventually carried out on 3 April 1971 by Mr H A Vigar, the former manager of RPC’s New Bilton Works.[6]

In August 1974, 2047 attended the Town and Country Fair at Stoneleigh. For the occasion the locomotive was repainted in a ‘Caledonian Railway’ lined blue livery and, with the consent of the Lord Lieutenant of Warwickshire, the Warwickshire Crest (the ragged bear and staff) was hand painted on the cab sides. The locomotive was confined to a short demonstration track only 40 feet in length, but managed to accumulate 8½ miles in the course of giving 2,500 footplate rides.[7]

Second boiler ticket and boiler failure

In 1975 2047 was withdrawn for the boiler to be retubed. It returned to service in 1977, being mainly used on works trains at Arley. In December of that year a leaking fusible plug was discovered and the locomotive was again withdrawn. Although this would normally be expected to be a simple fix, a series of delays followed, mainly due to the lack of available boilersmith resources and the relative low priority of a locomotive not used on passenger services. By 1983 only a brief examination had been carried out which determined that the failed plug was not a BRBritish Rail or British Railways standard size. A more detailed inspection in 1984 determined that the inner firebox fitted in 1954 had become very thin and would require considerable work; also the smokebox, smokebox door and ashpan would need to be replaced and the boiler retubed again.[8]

By 1988 the work had still not been carried out, and work on other boilers was being delayed while the new Bridgnorth boiler shop was built. The WILPG therefore sent the boiler from 2047 Warwickshire to Pridhams for overhaul. By August 1989, a report had been received confirming that the thickness of the boiler plate was below the acceptable level for further use and that repairs would not be economical. In addition, the use of the lap joints (see below) would potentially make the boiler uninsurable even if it was repaired.

In June 1992 it was agreed to return the boiler so that 2047 could be cosmetically restored and placed on static display at Kidderminster Railway Museum. In November 1993, the WILPG formed the Warwickshire Industrial Locomotive Trust to raise funds for building a new boiler. The cosmetic overhaul was completed in June 1995, included repainting into the original RPC green livery. After a period on display at Hampton Loade, 2047 was put on display outside Kidderminster Railway Museum on 15 February 1997.

Mileage recorded during the first and second boiler tickets as report in SVRSevern Valley Railway News was as follows:

Year Mileage
1971 196
1972 182
1973 76
1974 82
1975 20
1976 0
1977 260
Total 816

Note: The locomotive was first steamed in 1968 as recorded in David Cooke's photograph above. However none of the cumulative mileage tables in SVRSevern Valley Railway News show any mileage before 1971.

Current status

The long awaited overhaul of 2047 began in with a move to Bridgnorth in November 2010. In 2013 quotations between £61,390 and £101,433 were obtained for the new boiler with an estimate of overhaul cost from the SVRSevern Valley Railway of £184,306.[9] The overhaul progressed at Bridgnorth Loco Works, with re-wheeling taking place in December 2018. A number of smaller components were moved to Bewdley and on 25 November 2018 the original boiler, smokebox and saddle tank were moved there on Loriot N 42343. On 28 March 2019 the locomotive chassis was moved by BR Class 33 33108 from Bridgnorth to Bewdley Down Yard for restoration to continue.

After arrival at Bewdley, the cab roof and sides were removed in October 2019 and brake gear was re-fitted to frames in November 2019. New bufferbeam profiles were delivered in early 2020. As of March 2021 an order for the new boiler is anticipated to be placed in mid-2021 with delivery due in 2023/24. 2047 was shunted under cover on 30 March 2021, talking the place formerly occupied by GWR Large Prairie 4150.[10] Pictures of progress can be seen on the Warwickshire Industrial Locomotive Preservation Trust web site 2047 restoration page.

Boiler lap joints

The simplified diagram shows the cross section of boilers constructed using a lap joint (left) and butt joint (right). In the former, the metal sheet forming the boiler barrel is rolled beyond a circle and the overlapping edges are secured with two rows of rivets. In the latter, the two edges of the boiler barrel are butted together and outer and inner plates are used to reinforce the join. In the 1989 report, the practice of using lap joints was described as having been "proved many years ago to be defective and dangerous and whilst not prohibited in existing boilers, was made subject to very stringent and highly expensive testing procedures".[11]

The first photograph shows 2047’s old boiler at Bridgnorth in 2016. The ‘haycock’ firebox, so called because of the unusual height, is on the left with the boiler barrel on the right. The lap joint in the latter is secured by the two rows of rivets to the right. The other photographs show part of a boiler barrel (stood on end) constructed using a butt joint, with the smaller outer plate secured by four rows of rivets and the larger inner plate by a further two rows of rivets.

See also

Steam Locomotives
Warwickshire Industrial Loco Preservation Group
SVR-based locomotives visiting other events
Rolling stock currently under restoration

References

  1. Heritage Railway Magazine 17 September 2017 describes it as an N Class.
  2. Shaw (1998) p. 45.
  3. Shaw (1998) p. 49.
  4. Shaw (1998) p. 51.
  5. Williams (1974) p. 6.
  6. Shaw (1998) p. 52-53.
  7. Shaw (1998) p. 54.
  8. Shaw (1998) p. 55.
  9. 'WILT' page, David Cooke's website (retrieved 17 February 2018)
  10. WILT Restoration page
  11. JA Rees, SVRSevern Valley Railway Chief Engineer, cited in Shaw (1998) p. 56-57.